Flat Spra Rain Pipe

Approx. Rs 480 / PieceGet Latest Price

1. Material: Rain spray pipes are usually made from Low-density polyethylene (LDPE)  which are durable, flexible, and resistant to UV rays and chemicals.

2. Diameter: The 40mm size refers to the outer diameter of the pipe, which is suitable for moderate to large-scale irrigation systems. This size ensures a sufficient flow rate to cover a large area.

3. Water Distribution: The pipe has small perforations or nozzles along its length that release water in a spray pattern, effectively watering plants over a broad area.

4. Installation: These pipes can be laid out on the ground or mounted on risers for elevated spraying. They are typically connected to a main water supply through standard pipe fittings, such as clamps or quick-connect systems.

• Agriculture: Widely used in crop fields to maintain soil moisture levels and promote healthy plant growth.
• Horticulture: Ideal for watering flower beds, greenhouses, and nurseries.

• Landscaping: Used in parks, gardens, and lawns for maintaining greenery.

• Water Efficiency: Mimics natural rain, reducing water wastage.
• Uniform Coverage: Ensures even distribution of water across the targeted area.
• Easy Installation and Maintenance: Simple to set up and requires minimal upkeep.

• The table in the image outlines the requirements for setting up a rain pipe irrigation system for areas of 1 hectare and 1 acre. It lists the components needed, including PVC pipes, service saddles, rain pipes, control valves, start connectors, end caps, and joiners, with quantities specified for each area size.

  Breakdown of the Components:

  1. PVC Pipe:

     • 1 Hectare: 150 meters
     • 1 Acre: 60 meters

  2. Service Saddle:

     • 1 Hectare: 34 units
     • 1 Acre: 13 units

  3. 32/40mm Rain Pipe:

     • 1 Hectare: 1666 meters
     • 1 Acre: 666 meters

  4. 32/40mm Control Valve:

     • 1 Hectare: 34 units
     • 1 Acre: 13 units

  5. 32/40mm Start Connector:

     • 1 Hectare: 34 units
     • 1 Acre: 13 units

  6. 32/40mm End Cap:

     • 1 Hectare: 34 units
     • 1 Acre: 13 units

  7. 32/40mm Joiner:

     • 1 Hectare: 10 units
     • 1 Acre: 5 units
  Explanation:

  • Rain Pipe: The 32/40mm rain pipe is a key component of the irrigation system, used to distribute water evenly across the field, simulating natural rainfall. The amount of pipe needed increases with the size of the area being irrigated.

  • Control Valve: This allows for control over the water flow, enabling sections of the field to be watered independently.

  • Service Saddle: This fitting is used to tap into the mainline and connect it to the rain pipe.

  • Start Connector and End Cap: These are used to start and close off sections of the rain pipe, respectively.

  • Joiner: This component is used to connect two sections of the rain pipe or repair a pipe if it becomes damaged.

  This setup is typically used in agricultural fields to ensure even water distribution, which is crucial for crop health and growth. The system is designed to be scalable, with different components added or removed based on the specific area being irrigated.

Additional Information:

• Delivery Time: 3 days